Advertisement
DXE TFS-4
4.
Frequency coverage RX/TX: 80m
RX Only: NO
Control: 12V, 2 wires for BCD direction control + 1 wire for Omni
Rotator: 4 fixed directions + Omni
Placement: Free
RX safe: NO
Special requirement: Subselection buttons control direction. Azimuth [1]=SW, [2]=NW, [3]=NE, [4]=SE,
any three or more buttons selects OMNI, two buttons at once makes no change
Note: Default (no control power) direction is NW
OptiBeam OB2-80
5.
Frequency coverage RX/TX: 80m, 4 segments
RX Only: NO
Control: 12V, 4 wires for direct segment selection
Rotator: G-1000DXC
Placement: Tower 2
RX safe: NO
Special requirement: Antenna can not be used if Shunt-feed tower is in use.
Note: Segments 3500-3565, 3565-3725, 3725-3770, 3770-3800
OptiBeam OB16-3
6.
Frequency coverage RX/TX: 20, 15, 10m
RX Only: NO
Control: None
Rotator: TIC RING, RT-20 controller
Placement: Tower 2
RX safe: NO
Special requirement: Antenna can not be used if Shunt-feed tower is in use.
Note: None
Shunt-feed Tower
7.
Frequency coverage RX/TX: 160m, 3 segments
RX Only: NO
Control: 12V, 2 wires for segments selection
Rotator: None, Omni directional pattern
Placement: Tower 2
RX safe: NO
Special requirement: Antenna can not be used if OB2-80 or OB16-3 is in use.
Note: Segments 1810-1830, 1830-1880, 1900-1930, first segment is default (no control power)
Two wire Beverage #1
8.
Frequency coverage RX: 160-30m
RX Only: YES
Control: 12V, 1 wire for direction control
Rotator: 2 fixed directions, NW, SE
Placement: Free
RX safe: YES
Special requirement: LNA2
Note: Default (no control power) direction is NW
microHAM © 2016 All rights reserved
107
Advertisement
