Advertisement
In order to make a valid configuration there are several precautions which have to be observed.
Layout and document your RF installation. It is vital to start with a diagram showing the entire system,
•
including every component - transceivers, antennas, switches, amplifiers, filters, rotators etc. Station
Master Deluxe must know every device in the system in order to control everything correctly and safely.
In this manual, components of the RF setup are called "RF Boxes."
Give every RF BOX a short but easily understood name. This name will be included in many of SMD
•
reports.
Add the controls for every RF BOX. Document the number and function of the control wires, the type of
•
any RELAY control unit - ANTenna switching, FReQuency based switching, SEQuenced switching,
MANual, - the type of ROTATOR modules, and DATA modules.
Define addresses and units for the uLINK modules and verify the design.
•
microHAM © 2016 All rights reserved
CONFIGURATION MANAGEMENT TERMS
13
Advertisement
