Advertisement
RFS-2
•
RF box control directly connected to uLINK RELAY 10, Unit 2, 2 outputs for direction control.
Address #46
Preamplifiers controlled by two sequencer Units 1 and Unit 2 of uLINK RELAY 6. SEQ units assigned to
R ports of colliding antennas, TFS-4 and Low Dipole. Address #56
Prosistel PST51D
•
Rotator controller connected to RS232 port of uLINK DATA module. Address #67
Rotary Tower
•
Rotator connected to uLINK ROTATOR module. Address #64
Yaesu G-1000DXC
•
Rotator controller connected to uLINK ROTATOR module. Address #65
TIC RING + RT-20
•
Rotator controller connected to RS232 port of uLINK DATA module. Address #60
STACK SWITCH
•
Switch directly connected to uLINK RELAY 10 module, Unit 1, 8 outputs. Address #47
DOUBLE SIX SWITCH
•
Switch directly connected to uLINK RELAY 10 module, Unit SLAVE, 10 outputs. Address #44 and uLINK
RELAY 10, Unit 1 MASTER, 2 outputs, Address #43
DOUBLE TEN SWITCH
•
Switch directly connected to uLINK RELAY 10 module, Unit SLAVE, 10 outputs. Address #42 and uLINK
RELAY 10, Unit 1 MASTER, 10 outputs, Address #41
LNA 1
•
Preamplifier control connected to uLINK RELAY 6 module, Unit 3, 1 output for sequencing. Address #56
LNA 2
•
Preamplifier control connected to uLINK RELAY 6 module, Unit 3, 1 output for sequencing. Address #48
LNA 3
•
Preamplifier control connected to uLINK RELAY 6 module, Unit 4, 1 output for sequencing. Address #48
VIRTUAL SWITCH 1
•
Virtually controlled by uLINK RELAY 10, Unit 2, 0 outputs. Address #43
VIRTUAL SWITCH 2
•
Virtually controlled by uLINK RELAY 10, Unit 2, 0 outputs. Address #49
N-PLEXER
•
Virtually controlled by uLINK RELAY 10, Unit 4, 0 outputs. Address #56
For better reading and easier editing in Router we now make a list of Control boxes stating all units, their outputs,
and uLINK addresses.
uLINK DATA
•
uLINK ROTATOR
•
uLINK RELAY 10
•
uLINK RELAY 10
•
microHAM © 2016 All rights reserved
ADR=60, 61, 62, 63, 67
ADR=64, 65
ADR=41
Unit=1, 2 outputs + 10 on Slave #42
ADR=42
Relay Units=1
Relay Units=Slave
113
Advertisement
