Advertisement
RX1-RX2-TX/RX SPLIT
10.
A short press moves between antenna selections for the RX1, RX2 and TX paths
Press and hold for more than one second toggles RX1/RX2 receive antennas split "RX SPLIT"
RX SPLIT is indicated by small 1 or 2 number on left side of focus mark
[1] Antenna sub-selection nr. 1
11.
12.
[2] Antenna sub-selection nr. 2
[3] Antenna sub-selection nr. 3
13.
[4] Antenna sub-selection nr. 4
14.
MB1, MB2, MB3
15.
Short press and release recalls memory bank 1, 2, or 3 settings.
Press and hold for more than one second stores current settings to memory bank 1, 2 or 3.
Each memory bank is band-dependent.
ENCODER
16.
Rotary encoder with push button. Functions vary based on configuration and antenna selection.
<-/YES
17.
Button for browsing backward among available antennas and menu navigation.
->/NO
18.
Button for browsing forward among available antennas and menu navigation.
PATH/TX SPLIT
19.
Short press invokes selected PATH properties menu if exist.
Press and hold for more than one second toggles RX/TX antennas split, "TX SPLIT".
TX SPLIT enabled is indicated by yellow led above button.
microHAM © 2016 All rights reserved
7
Advertisement
