Infocenter Display; Infocenter Display - Toro Reelmaster 7000-D Service Manual

InfoCenter Display

The InfoCenter Display used on your Reelmaster is a
LCD device that is located on the console arm (Fig. 6).
2
The InfoCenter provides information for machine Oper-
ators, it provides electrical system diagnostic assis-
tance for technicians, and provides access to adjustable
1
machine settings (Fig. 7).
A CAN−bus system provides communication necessary
for machine operation between the Toro Electronic Con-
troller (TEC), the engine ECU (on machines with Yan-
mar diesel engines), and the InfoCenter.
Use the InfoCenter Display to test TEC inputs and out-
puts when troubleshooting an electrical problem on your
Reelmaster 7000−D (see Using the InfoCenter Display
to Test TEC Inputs and Outputs in this chapter).
NOTE: Icons used by the InfoCenter display are identi-
MODEL 03780 SHOWN
fied in the traction unit Operator's Manual.
Figure 6
1. Console arm

2. InfoCenter Display

Electrical System Page 6 − 8 Reelmaster 7000−D