Mitsubishi Electric MELIPC MI5000 Series User Manual page 64

Selected station communication status monitor
Displays status of the station selected in "Network status".
■If the station with error occurring is selected
(1)
(3)
No. Description
(1) Indicates the operating status.
• Station No.: Normal operation
• Station No. Error occurrence (yellow): Error occurrence (data link running)
• Station No. Error occurrence (red): Error occurrence (data link stopped)
(2) Displays the mode.
(3) Displays the MAC address.
(4) Click the displayed button to confirm details of the error.
Handle in accordance with the displayed "Fault cause" and "Troubleshooting".
(5) Displays the module LED status, as well as the P1 and P2 communication status will be displayed.
(6) Displays the cable status.
■If a station without network number or station No. set is selected
(1)
No. Description
(1) Set the station No. to a slave station that does not have a number set.
In "Network status", this is only displayed if slave stations that fulfill all of the following conditions are selected.
• The slave station does not support station No. setting from the master station
• A station No. is not set for the slave station
If adding a station set in "Network Configuration Settings" of "Basic Settings", the output from the master station at the same time as the station
number setting is output from the external device of the slave station. Check whether the CPU module is in STOP status, and make sure there is no
problem even when there is output from the external device of the slave station.
*1 Refer to the user manual for the slave station being used as to methods to use CC-Link IE Field diagnoses to clear the station No. set in
the slave station.
6 CC-Link IE Field Network FUNCTION
62
6.4 CC-Link IE Field Network diagnosis
*1
(2)
(4)
(5)
(6)