Mitsubishi Electric MELIPC MI5000 Series User Manual page 193

Displayed items
■Cyclic supplementary settings
Item

Input/output
retention clear
Output retention/
settings
clear settings at
MELIPC STOP
Data link abnormal
station settings
Output mode
settings at MELIPC
error
■Parameter name
Item
Parameter name
■Other station event acquisition settings
Item
Other station event acquisition settings
■MELIPC dynamic mode settings
Item
MELIPC dynamic mode settings
■Access target settings
Item
Access target settings
Description
Configure the input and output retention and clear settings.
Set whether to retain or clear the output of cyclic data when the
MELIPC enters a STOP condition.
Retain input data from slave stations that have shown abnormal data
link.
Clear the MELIPC output settings when a stop error has occurred in
the MELIPC.
Description
Set the parameter name as necessary.
Description
Set whether to acquire events generated by other stations on the same
network.
If "Acquire" is selected, events generated by other stations are
registered in the event history.
Description
Set the MELIPC operation mode.
• Online mode (mode normally used by MELIPC)
Description
Set an access target when accessing from another station for transient
transmission to another CPU module in a multiple system
configuration.
Setting range

• Retention
• Clear
(Default: Retain)
Retention
Clear
Setting range
8 characters
(Default: Blank)
Setting range
• Acquire
• Do not acquire
(Default: Acquire)
Setting range
Online mode
Setting range
Access Target
Settings
18 APPRICATION PARAMETERS
18.1 CC-Link IE Field Network Parameters List
Parameter
No.
18
A050H
7101H
Parameter
No.
7310H
Parameter
No.
A016H
Parameter
No.
7100H
Parameter
No.
7903H
191