Mitsubishi Electric MELIPC MI5000 Series User Manual page 233

Error code Error name
412BH File related error
412CH File related error
412DH File related error
412EH File related error
412FH File related error
4130H File related error
4131H File related error
4132H File related error
4133H File related error
4134H File related error
4135H File related error
4136H File related error
4137H File related error
4138H File related error
4139H File related error
413AH File related error
413BH File related error
413CH File related error
413DH File related error
413EH File related error
414CH MELIPC related error
4150H File related error
4151H File related error
4170H Ethernet port error
4171H Ethernet port error
4174H Ethernet port error
Description
The specified drive (memory) is write
protected.
The specified drive (memory) is write
protected.
The specified drive (memory) does not have
enough free space.
The specified drive (memory) does not have
enough free space.
The drive (memory) capacity differs
between copy destination and copy source
of the drive (memory).
The drive (memory) type differs between
copy destination and copy source of the
drive (memory).
The file name of the copy destination is the
same as the one of the copy source.
The specified number of files does not exist.
The specified device (memory) has no free
space.
The attribute specification data for a file is
incorrect.
The date/time data of the engineering tool
(personal computer) is out of range.
The specified file already exists.
The specified file is a read-only file.
Simultaneously accessible files exceeded
the maximum.
The size range of the specified file has
exceeded the existing one.
The size of the specified file has exceeded
the existing one.
The same file was access from a different
engineering tool.
The specified file is write protected.
The specified file capacity cannot be
secured.
Operation is disabled for the specified drive
(memory).
Inaccessible buffer memory address was
specified.
Formatting of a system protected drive was
attempted.
Deletion of a system protected file was
attempted.
There is an error in the remote password.
The port used for communication has a
remote password lock.
The device that requested unlock
processing of the remote password is
different.
Corrective action
Change the write prohibited conditions or
drive (memory), and execute again.
Change the write prohibited conditions or
drive (memory), and execute again.
Increase the free space of the drive
(memory), and execute the function again.
Increase the free space of the drive
(memory), and execute the function again.
Check the copy destination and copy
source drive (memory), and execute the
request again.
Check the copy destination and copy
source drive (memory), and execute the
request again.
Check the file name, and execute the
request again.
Check the specified data, and execute the
request again.
Increase the free space of the drive
(memory), and execute the function again.
Check the specified data, and execute the
request again.
Check the clock setting of the engineering
tool (personal computer), and execute the
request again.
Check the specified file name, and execute
the request again.
Change the conditions for the specified file,
and execute the request again.
Reduce file operations, and execute again.
Check the size of the specified file, and
execute the request again.
Check the size of the specified file, and
execute the request again.
Execute it again after a while.
Change the conditions for the file, and
execute again.
Increase the capacity of the specified drive
(memory), and execute again.
Change the target drive (memory), and
execute the request again.
Check the buffer memory address, and
execute the request again.
Formatting of the target drive (memory) is
not possible, therefore this is not formatted.
Deletion of the target file is not possible;
therefore this is not deleted.
Review the specified remote password, and
then execute unlock processing/lock
processing of the remote password again.
Execute unlock processing of the remote
password before communication.
• Request lock processing of the remote
password from the external device that
requested unlock processing of the
remote password. To configure the
remote password, the MELSOFT
connection uses TCP.
APPX
Appendix 2 List of Error Codes
A
231