Mitsubishi Electric MELIPC MI5000 Series User Manual page 120

Only the connection statuses of devices configured by the External device communications network
configuration are displayed. Connection statuses are not displayed for other connected devices. (The
connection status cannot be checked even when an SNTP server is connected to the Ethernet port (CH1). )
To check the status of a connection with a device not covered by the external device configuration
diagnostics, use a command (netstat, ping, etc.) to check the network status of VxWorks.
Precautions
It is not necessary to configure the external device configuration for the connection of MI Configurator installed in the
Windows part. As a result, it is not displayed by the external device configuration diagnostics. Connect a display to this
product, and then check whether MI Configurator can operate.
8 DIAGNOSTIC AND MAINTENANCE FUNCTIONS
118
8.6 External Device Configuration Diagnostics Function