Mitsubishi Electric MELIPC MI5000 Series User Manual page 255

Appendix 3
This section shows the codes for events that occurs in this product.
VxWorks part
The following table shows the codes for events that occur in the VxWorks part of this product.
Event code Event type
140H System
400H System
420H System
450H System
470H System
480H System
10300H Security
10602H Security
20100H Operation
20200H Operation
24000H Operation
24001H Operation
24100H Operation
24101H Operation
24200H Operation
24203H Operation
24204H Operation
24205H Operation
24300H Operation
24301H Operation
25000H Operation
2A200H Operation
2A201H Operation
2A202H Operation
Event List
Event category Event
Information SNTP server time synchronization
failure
Information Power ON and RESET
Information Event history file generation
Information Start/end of daylight saving time
Information Windows part restart
Information Fan module filter clean notification
Information In IP filtering settings, access set
as prohibited received
Information Failed logon
Information Error clear
Information Event history clear
Information Clock setting
Information Remote operation request
acceptance
Information Operating status change (RUN)
Information Operating status change (STOP)
Information Creation of new folders, writes to
files/folders
Information Windows part forced restart
request
Information MELIPC shutdown request
Information Fan module filter clean completed
Information Windows part forced restart start
Information MELIPC shutdown start
Information Registration from a user program
Warning Memory initialization
Warning Zero clearing of device
Warning Folder/file deletion
Description
There was no response from the SNTP server, and
the time synchronization function failed to set the
time.
Power ON/RESET has been canceled.
A event history file has been generated.
Daylight saving time started or ended.
The Windows part was restarted.
The fan module filter must be cleaned.
Access received from IP address set as access
prohibited in IP filtering settings.
Logon by the user authentication function failed.
An error was cleared.
An event history was cleared.
The clock setting was performed.
A remote operation request (RUN/STOP) was
accepted.
The operating status was changed to RUN.
The operating status was changed to STOP.
• A new folder was created.
• A new file was created or data was written to a file.
A Windows part forced restart request was received.
A MELIPC shutdown request was received.
Fan module filter cleaning was carried out.
A Windows part forced restart was started.
A MELIPC shutdown was started.
An event history was registered with the C Controller
module dedicated function.
The memory was initialized.
Data of the device was cleared to zero.
Folder/file deleted.
Appendix 3 Event List
A
APPX
253