Mitsubishi Electric MELIPC MI5000 Series User Manual page 182

If an error occurs during automatic detection of connected devices, the following screen appears.
The error codes of the following list indicate the last four digits of "0x2c09****".
Error code
480CH
480DH
480EH
C055H to C056H
C059H
C05CH
C061H
CEE0H
CEE1H to CEE2H
CF10H
CF20H
17 BASIC PARAMETERS
180
17.2 Network Configuration Settings
Error details and cause
The specified command cannot be run because an
automatic search of connected devices is running.
• The specified command cannot be run because slave
station communication settings are being applied.
• A communication timeout occurred.
• The specified command cannot be run because slave
station parameter processing is occurring.
• A communication timeout occurred.
System error
The target device ran an unsupported function.
• A communication setting value is out of range.
• A communication setting value that cannot be
configured was configured for the target device.
• A necessary setting item has not been configured on
the target device.
System error
There was a search from another peripheral device, or
another online function was run during automatic
detection of connected devices.
System error
System error
• A communication setting value is out of range.
• A communication setting value that cannot be
configured was configured for the target device.
• A necessary setting item has not been configured on
the target device.
Corrective action
After the automatic search of connected devices is
complete, run the command again.
• After the slave station communication settings have
been applied, run the command again.
• Review the communication time set for the Check
Communication Time of MI Configurator.
• Wait and then run the command again.
• Review the communication time set for the Check
Communication Time of MI Configurator.
• Check the considerations of the function that was run.
• Check the operation status and connection of target
devices.
• Check the Ethernet cable and hub connections.
• Check the Ethernet line status.
• Reset the CPU modules and target devices, and then
run the command again.
If the problem still cannot be resolved, contact the
manufacturer of the target device.
Check if the target device supports the function that was
run.
Review the setting content, and then run the command
again.
• Check the considerations of the function that was run.
• Check the operation status and connection of target
devices.
• Check the Ethernet cable and hub connections.
• Check the Ethernet line status.
• Reset the CPU modules and target devices, and then
run the command again.
If the problem still cannot be resolved, contact the
manufacturer of the target device.
After the automatic search of connected devices is
complete, run the other function again.
• Check the considerations of the function that was run.
• Check the operation status and connection of target
devices.
• Check the Ethernet cable and hub connections.
• Check the Ethernet line status.
• Reset the CPU modules and target devices, and then
run the command again.
If the problem still cannot be resolved, contact the
manufacturer of the target device.
Review the setting content, and then run the command
again.