Mitsubishi Electric MELIPC MI5000 Series User Manual page 121

8.7
Function to Forcibly Restart Windows During an
Error
This function forces a restart of the Windows part only without resetting this product if a freeze or system error occurs on the
Windows part, and a system watchdog timer error occurs.
Use this function to restart the Windows part immediately if a system watchdog timer error or similar problem occurs.
A
A: VxWorks part
B: Windows part
(1) User program
(2) Restart
Forced restart settings
Configure a forced restart of the Windows part using "MELIPC operation upon error detection setting" of "RAS Setting". (
Page 96 MELIPC operation upon error detection setting)
Precautions
■Automatic restart at a Windows system error
If Windows automatic restart is enabled, and 'Restart' is selected for when the Windows part stops, this product may restart
repeatedly. If 'Restart' is selected, disable Windows automatic restart.
Windows Start  [Windows System Tools]  [Control Panel]  [System and Security]  [System]  [Advanced system
settings]  [Advanced]  [Startup and Recovery]  [Settings]  [System failure]  [Automatically restart]
■Advance processing registration of Windows part forced restart
Even when registered in advance with the Windows forced restart function, processing registered by the user is not performed
when the Windows part forced restart function forces a restart of the Windows part due to an error. ( Page 124 Advance
processing during a forced restart)
To enable this function and protect files, enable the Unified Write Filter installed on this product to protect the Windows system
files.
For the configuration method of the Unified Write Filter, refer to the following manual.
MELIPC MI5000 Series User's Manual (Startup)
(1)
B
(1)
(2)
8 DIAGNOSTIC AND MAINTENANCE FUNCTIONS
8.7 Function to Forcibly Restart Windows During an Error
8
119