Mitsubishi Electric MELIPC MI5000 Series User Manual page 51

Output status when this product is STOP
Set whether to retain or clear the output of cyclic data when this product enters a STOP condition.
Setting method
Configure the output status when the MELIPC is STOP by using "Cyclic Support Function" of "Applicable settings". (
Page 187 CC-Link IE Field Network Parameters List)
Link device output status
The following table shows the relationship between link devices and output statuses of a MELIPC (retain or clear).
Link device
RY
RWw
Cyclic transmission stop & restart
Cyclic transmission can be stopped (stopping of data receiving from slave stations and data sending from own station) during
debugging and other situations. Furthermore, stopped cyclic transmission can be restarted. Transient transmission does not
stop.
Stop and restart of cyclic transmission is carried out in CC-Link IE Field Network diagnosis link start/stop. ( Page 53 CC-
Link IE Field Network diagnosis)
Output retention/clear settings at MELIPC STOP
When retention is configured
Retention
Retention
When clearing is configured
Clear
Retention
6 CC-Link IE Field Network FUNCTION
6.1 Cyclic Transmission
6
49