Mitsubishi Electric MELIPC MI5000 Series User Manual page 166

Displayed items
■Remote operation settings
Item
MELIPC RESET
WIN RESET
■Clock related setting
Item

Clock
simpl
e
Clock simple settings
settin
gs

Clock Cloc
simpl k
e setti
Time zone (hour)
settin ng
gs
Time zone (minute)
Comment
17 BASIC PARAMETERS
164
17.1 Basic Parameter List
Description
Configure "Enable" or "Disable" for MELIPC RESET by a remote
operation.
If "Enable" is configured, MELIPC RESET is possible.
When an MELIPC reset is performed, the MELIPC operation status must
be STOP.
Configure "Enable" or "Disable" for WIN RESET by a remote operation.
If "Enable" is configured, WIN RESET is possible.
Description
Configure the daylight saving time setting through
basic operations.
By specifying Time zone and Adjust clock for daylight
saving time, a specified week or specified date is
configured automatically.
Configure the time zone and daylight saving time
setting.
Set when using time zones on the VxWorks part.
Setting the time zone (hour and minute) enables
operation in accordance with the time zone of the
region in which the VxWorks clock is used.
Configures the minute of the time zone in units of 15
minutes.
Set when entering a comment such as a city name for
a time zone.
Setting range parameter
No.
• Disable 3202H
• Enable
(Default: Disable)
• Disable 6E21H
• Enable
(Default: Disable)
Setting range parameter
No.

Clock Simple Settings 

UTC+13 to UTC-12 3209H
(Default: UTC+9)
00 to 45
(Default: 00)
32 characters or less
(Unicode)
(Default: Blank)