Mitsubishi Electric MELIPC MI5000 Series User Manual page 235

Error code Error name
41B4H Ethernet port error
41B6H Ethernet port error
41B7H Ethernet port error
41C1H File related error
41C2H File related error
41C3H File related error
41C4H File related error
41C5H File related error
41C7H File related error
41C8H File related error
41C9H File related error
41CAH File related error
41CBH File related error
41CCH File related error
41CDH File related error
41CEH File related error
41CFH File related error
41D0H File related error
41D5H File related error
41D6H File related error
41D7H File related error
41D8H File related error
41DFH File related error
Description
There is an error in the specification of the
connection number.
The specified connection has already
completed open processing.
The specified connection has not completed
open processing.
The format information data of the specified
drive (memory) is abnormal.
File open specification data for file access is
wrong.
Simultaneously accessible files exceeded
the maximum.
Simultaneously accessible files exceeded
the maximum.
The specified file does not exist.
The specified file or drive (memory) doesn't
exist.
The size range of the specified file has
exceeded the existing one.
• Failed to access the file sector.
• The format information data of the target
drive (memory) is abnormal.
• Failed to access the file sector. The
format information data of the target drive
(memory) is abnormal.
There is an error in the specification method
of the file name.
The specified file does not exist.
Alternatively, the specified subdirectory
does not exist.
• Access that is prohibited by file attributes
was performed. Alternatively, a change of
prohibited file attributes was attempted.
• File access is prohibited by the system.
File writing is not possible because the
specified file is read-only.
The capacity of the specified drive
(memory) has been exceeded.
There is no free space on the specified
drive (memory) or the number of files in the
directory of the specified drive (memory)
exceeds the maximum.
A file of the same name already exists.
The format information data of the specified
drive (memory) is abnormal.
The format information data of the specified
drive (memory) is abnormal.
The specified file is being accessed.
A request was issued to the system file.
Corrective action
• Specify a connection number from 1
through 16.
• Check whether the open method of the
parameter is "socket communication".
Perform close processing, and then perform
open processing.
Execute again after open processing is
completed.
• The file information data may be
corrupted.
• Back up the data of the /ROM folder, and
then initialize the memory.
Execute again after checking the
specification data.
Reduce file operations, and execute again.
Reduce file operations, and execute again.
Check the file, and execute the request
again.
Execute again after checking the file or
drive (memory).
• Check the size of the specified file, and
execute the request again.
• If the error occurs after re-execution, the
file information data may be corrupted.
• Back up the data of the /ROM folder, and
then initialize the memory.
Back up the data of the /ROM folder, and
then initialize the memory.
Back up the data of the /ROM folder, and
then initialize the memory.
Check the file, and execute the request
again.
Execute again after checking the name of
the file and subdirectory.
• Check the attributes and open mode of
the file.
• Do not access the specified file and
subdirectory.
• Execute again after checking the file and
subdirectory.
The specified file is write protected. Execute
again after checking the attributes.
Delete files of the /ROM folder, and then
execute again.
Delete files of the /ROM folder, and then
execute again.
Forcibly execute the request. Or, change
the file name and execute the request
again.
Back up the data of the /ROM folder, and
then initialize the memory.
Back up the data of the /ROM folder, and
then initialize the memory.
Execute it again after a while.
Check command data such as SLMP.
APPX
Appendix 2 List of Error Codes
A
233