Mitsubishi Electric MELIPC MI5000 Series User Manual page 220

Access to recordable media such as external hard disks is not
possible
Check item
Is the recordable media connected to a USB port?
Are any USB3.0 devices being used?
Has the recordable media been formatted?
A USB device does not operate
Check item
Is the USB device plugged into a USB port?
Are any USB3.0 devices being used?
The Windows part takes time to start
Check item
Is there sufficient free space on the C drive?
Have unnecessary applications been installed?
Is the screen of Windows stuck for a long time?
In a Japanese language OS, the keyboard has an English layout.
Check item
After starting this product or after Windows recovery, when restarting, was
Japanese selected at setup?
Is the keyboard set to an English layout?
Even when changed, the date and time values are changed to
other values
Check item
Is "Use" configured for Clock data synchronization?
Ethernet CH2 is not displayed in the network adapter.
Check item
Is the Ethernet cable is connected correctly to Ethernet port (CH2)?
Ethernet port (CH2) uses Ethernet CH2(Intel(R)) I210 Gigabit Network Connection #
*1 : Input numerals.
APPX
218
Appendix 1 Troubleshooting by Symptom
Corrective action
Connects the recordable media to a USB port.
Connect to a USB port supporting USB3.0.
Format the recordable media.
Corrective action
Connect a USB device that has once been connected to the USB port. If it
does not work, then replace the USB device.
Connect to a USB port supporting USB3.0.
Corrective action
Remove unnecessary files to create free space.
Uninstall unnecessary applications.
Reset the product with the switch or turn the power OFF and ON.
Corrective action
Change the keyboard layout to Japanese.
MELIPC MI5000 Series User's Manual (Startup)
Corrective action
• Configure "Do Not Use" for Clock data synchronization.
• Change the date and time using the clock setting of MI Configurator.
Corrective action
Connect the Ethernet cable to Ethernet port (CH2).
*1
.