Mitsubishi Electric MELIPC MI5000 Series User Manual page 108

remote RESET
This section shows the operation methods of remote RESET.
■MI Configurator
Use a remote operation of MI Configurator.
[Online][Remote operation][MELIPC RESET]
A MELIPC RESET or WIN RESET cannot be run when a remote operation was performed by MI Configurator
that is installed on the Windows part of this product.
■SLMP
For details on SLMP, refer to the following manual.
SLMP Reference Manual
Precautions
■Enabling remote RESET
Before performing a remote RESET, enable remote RESET in MI Configurator.
[Basic Parameter]  [Operation Related Setting]  [Remote operation settings]
■Considerations before executing a remote RESET
Set the operating status of this product to the STOP status.
Before a remote RESET, close or exit user applications of the Windows part and VxWorks part. If a remote RESET is
performed during operation of a user program, the user program or files may be corrupted.
■Considerations after executing a remote RESET
Communication between external devices and this product are cut. Connect them again.
■Remote RESET at error stop
If this product is stopped due to an error when a remote RESET is performed, this product starts in the operating status
configured by the switch.
■System reset
A system reset can also be performed by the MELIPC RESET/WIN RESET switch. (MELIPC MI5000 Series User's
Manual (Startup))
8 DIAGNOSTIC AND MAINTENANCE FUNCTIONS
106
8.3 Operating Status Management Function