Gap 9-11 - GE Mark VIeS System Manual

8.3.4.10 Gap 9-11

[ ] = defaults
Name Direction
GAP9_POS1 AnalogInput
GAP10_POS2 AnalogInput
GAP11_POS3 AnalogInput
GnBiasOvride Snsr_Offset
Gain Bias Amount of bias
Override voltage (dc) to
[Disable], Enable remove from
input signal used
to max. A/Ds
signal range
used only when
GnBiasOvride is
enabled
[10]
±13.5
SysLim2Enabl
Enable System Limit 2
[Disable], Enable
268 GEH-6855_Vol_II
Data Description
Type
REAL Average Air Gap,DC
component of input#9
REAL Average Air Gap,DC
component of input#10
REAL Average Air Gap,DC
component of input#11
Gain SysLim1Enabl
Resolution of Enable System
input signal (net Limit 1
gain unchanged), [Disable], Enable
select based on
expected range,
use only if
GnBiasOvride is
enabled
[1x], 2x, 4x, 8x
SysLim2Latch
Latch the alarm
[Latch], NotLatch
GEH-6855_Vol_II Mark VIeS Functional Safety Systems Volume II
VIB_Type2 Scale
Volts/mil
Sensor Type, group
or
2
Volts/ips
[Unused],
[0.2]
PosProx
0 to 2
SysLim1Latch
Latch the alarm
[Latch], NotLatch
SysLim2Type
System Limit 2 Check Type
[ >= ] , <=
Public Information
Scale_Off TMR_
DiffLimit
Scale offset Difference
for Prox Limit for Voted
position TMR Inputs in
only, in mils Volts or Mils
[0] [2]
0 to 90 -100 to 100
SysLim1Type SysLimit1
System Limit 1 System Limit 1 –
Check Type GAP in negative
[ >= ] , <= volts (Velomitor)
or positive mils
(Prox)
[90]
-100 to 100
SysLimit2
System Limit 2 – GAP in
negative volts (Velomitor) or
positive mils (Prox)
[10]
-100 to 100