Component Editor - GE Mark VIeS System Manual

8.3.4 Component Editor

8.3.4.1 Parameters
Parameter
SystemLimits
OperatingMode
Vib_PP_Fltr
MaxVolt_Prox
MinVolt_Prox
MaxVolt_KP
MinVolt_KP
MaxVolt_Seis
MinVolt_Seis
MaxVolt_Acc
MinVolt_Acc
MaxVolt_Vel
MinVolt_Vel
MaxVolt_CDM_BN
MinVolt_CDM_BN
MaxVolt_CDM_PCB
MinVolt_CDM_PCB
CDM_Scan_Period
262 GEH-6855_Vol_II
Description
Allows user to temporarily disable all system limit checks for testing purposes.
Setting this parameter to Disable will cause a diagnostic alarm to occur.
Enhanced enables enhanced algorithms for YVIBS1B that are not compatible
with YVIBH1A, including Low Latency Peak-Peak Algorithm and Vibration
RMS Algorithm
First order filter time constant (sec) — cannot be disabled
Maximum Input Volts (pk-neg), healthy Input, Prox
Minimum Input Volts (pk-neg), healthy Input, Prox
Maximum Input Volts (pk-neg), healthy Input, Keyphasor
Minimum Input Volts (pk-neg), healthy Input, Keyphasor
Maximum Input Volts (pk-pos),healthy Input,Seismic:Values > 1.25 require
use of GnBiasOvride
Minimum Input Volts (pk-neg),healthy Input,Seismic:Values < -1.25 require
use of GnBiasOvride
Maximum Input Volts (pk),healthy Input,Accel
Minimum Input Volts (pk-neg),healthy Input,Accel
Maximum Input Volts (pk),healthy Input,Velomitor
Minimum Input Volts (pk-neg),healthy Input,Velomitor
Maximum Input Volts (pk),healthy Input,CDM Bently Nevada
Minimum Input Volts (pk-neg),healthy Input,CDM Bently Nevada
Maximum Input Volts (pk),healthy Input,CDM PCB
Minimum Input Volts (pk-neg),healthy Input,CDM PCB
The scan period for CDM sensor inputs in seconds
Only assign as 0.01 increments
GEH-6855_Vol_II Mark VIeS Functional Safety Systems Volume II
Public Information
Choices
Enable (default)
Disable
Legacy (default)
Enhanced
0.01 to 2
(default is 0.10)
-4 to 0
(default is -1.5)
-24 to -16
(default is -18.5)
-4 to 0
(default is -1.5)
-24 to -16
(default is -22.0)
0 to 2.75
(default is 1.0)
-2.75 to 0
(default is -1.0)
-12 to 1.5
(default is -8.5)
-24 to -1
(default is -11.5)
-12 to 1.5
-24 to -1
-12 to 24
-24 to 12
-12 to 24
-24 to 12
0.01 to 2.0