Ope Controller - Samsung CLX-9350ND Service Manual

The Image Controller (ICON) is used to compress and
images processing and transceiving relevant data to a
Video Controller uses the PowerPC 1GHz, 1GB Memo
successfully. The Video Controller also communicate
Controller to display some of the system information.
The USB HUB Controller interfaces with the Video Co
such as USB memory sticks and Authentication device
The OPE Controller displays the status of the system b
actions or the Video controller.
The Scan Controller scans images using the Platen or
The DADF Controller controls some mechanisms requ
communicates with the Scan Controller to synchronize
the scanning data to the Video Controller through the P
A MICOM at the Engine Controller activates each cont
optimized energy-saving algorithm for optimal efficienc
side is used to safely shut down the system power. It i
Service Manual
CLX-9250/9350 series
2. Product d description
d decompress images for enhancing performance of
and from the Video Controller through the PCIe. The
ory, and a 250GB HDD to perform these jobs
s with the OPE Controller through the USB HUB
ntroller, the OPE Controller, and some USB Devices
es such as Common Access Card readers.
by using the WSVGA TFT LCD in response to user
r the DADF.
uired to scan by feeder continuously and
e the scanning timing. The Scan Controller transfers
PCIe high speed bus.
troller's power and turns off power according to an
cy. The soft Power Switch in the OPE Controller left-
s controlled by the MICOM.
2-7 70
SAMSUNG ELECTRONICS