Adjustment - Samsung CLX-9350ND Service Manual

4.5.4. Adjustment

4.5.4.1. Print Adjustment
• Diagnostics > Adjustment > Print Adjustmen
Purpose P
Operation
Procedure
Verification V ifi ti
Specification
Reference
Figure 5-1 Front Side
Service Manual
CLX-9250/9350 series
To correct image position of prin T t i iti
1. Press "Paper Supply" button
2. Press "Paper Size" button a
tray.
3. Press "Print" button. A test p
4. Press "Next" button. The sy
5. Locate the front side of Sca
ADF cannot be used.
6. Press "OK" button. Automa
7. Locate the back side of Sca
press "OK" button once mo
8. The system will automatica
result of the test pattern.
9. The new value s are set to t
P i t Print out and check if all the pos t d h k if ll th
located within the specified limit
ⓐ,ⓑ,ⓔ,ⓕ : 10mm, ± 1.5mm
Figure 5-1, 5-2
4.Servic ce Mode
nt > Automatic Adjustment
f i nt-outs automatically. t t t ti
n and select a tray.
and select a paper size of the previously selected
pattern will be printed out.
ystem ask to locate the test pattern.
nner A/S Chart at the scanner glass . Note that
atic scanning will occur .
anner A/S Chart at the scanner glass again and
ore.
ally calculate the proper value based on scanning
the system.
sition of scale marks (ⓐ,ⓑ,ⓔ,ⓕ) in the image are iti f l
t.
4-3 30
ll
k (ⓐ ⓑ ⓔ ⓕ) i th i
Figure 5-2 Back Side
SAMSUNG ELECTRONICS