Samsung CLX-9350ND Service Manual page 53

2.5.3 Cartridge Transfer un
2.5.3.1 Cartridge Transfer u
The toner is moved from the four drums to the ITB by
rotation of the ITB (four toner images are super-impos
drums on the diagram shows the direction of ITB rotat
toner image from the transfer belt to the paper. The p
in the transfer unit cleans the belt surface with the clea
collected from the belt is transported to the toner colle
them are for the line position adjustment. The other is th f th li
the Cleaning Unit and there is an ITB EEPROM in the
status of the cleaning unit and ITB.
7
6
10 10
Service Manual
CLX-9250/9350 series
2. Product d
iti dj t t Th
1
4
Y
1 Image Transfer Be
2 Image Transfer Ro
3 3 ITB D i ITB Drive Roller
4 Tension Roller
5 Rotation Encoder
6 Cleaning EEPROM
7 Cleaning Blade g
8 ACR Sensor
9 Paper Transfer Ro
10 Toner Collection A
11 ITB Belt EEPROM
description
it
unit overview
the four image transfer rollers. This is done with one
sed onto the belt). The arrow above the C and M
ion. The ITB drive roller then moves the four-color
aper transfer roller is an idle roller. The cleaning unit
aning blade and tension roller. The used toner
ction bottle. There are three ACR sensors. Two of
th i s for process control. There is a cleaning EEPROM at f
main frame. It is therefore, possible to check the
2
M C
elt (ITB)
oller (Primary transfer)
R ll
M
oller
Auger
M
2-3 36
t l Th i l i
11
K
SAMSUNG ELECTRONICS
EEPROM t
8
3
9
5