● Code :
C6-1412
● Symptom / Cause :
1. The fuser unit could not detect the EEPROM.
2. EEPROM information is different from machine info
3. Fuser unit is not compatible with this machine.
● Troubleshooting method :
1. Turn the machine off and turn it on again.
2. If the problem persists, check the following :
2. If the problem persists, check the following :
A. Turn the machine off.
B. Open the side-cover and remove the fuser unit.
C. Remove the support-lever belt on the front of the f
D. Remove the frame-fuser front.
E. Check if the EEPROM connector is disconnected.
F. Check if the EEPROM is broken or deformed.
G. Re-install the fuser unit.
H. Turn the machine on.
I. If the problem persists, replace the fuser unit.
3. Print the supply information report, if printing is poss
Check if EEPROM information is correct.
Check if EEPROM information is correct.
● Replacement part
- JC91-00931A : FUSER (220V)
- JC91-00930A : FUSER (110V)
Service Manual
CLX-9250/9350 series
7. Troubles
shooting
● Error message :
:
Fuser unit is not com
mpatible. Check User's Guide.
ormation.
fuser unit.
.
sible.
7-6
64
SAMSUNG ELECTRONICS