Gear - Samsung CLX-9350ND Service Manual

3.5.7 Gear

Perform the following procedure to remove the Gear fr
[A]
[C]
Service Manual
CLX-9250/9350 series
3. Replacemen
[B]
[E]
[D] [D]
nt Procedures
rom the Fuser Unit.
1. Remove the motor (Refer to 3.5.3)
2. Remove the shaft PR screw [A].
3. Push and release the DC Harness holder [B] in
the direction of arrow after removing 1 screw.
4. Remove the bracket [C] after removing 3 screws.
5. Remove the Gear Holder after removing 1 screw.
6. Remove the gears. 6 R th
7. Remove the Gear after removing the E-ring with
the tweezers.
3-3 38
SAMSUNG ELECTRONICS