Samsung CLX-9350ND Service Manual page 482

● Code :
U3-3611
U3-3613
U3-3614
● Symptom / Cause :
y
During a DADF job, the document doesn't pass the ex
● Troubleshooting method :
1 If there is a document in the Feed Out Assy open t 1. If there is a document in the Feed Out Assy, open t
document.
2. Close the Feed Out Assy.
3. If there is a document in the Exit turn section, open
document.
4. Close the Cover-Exit Tray.
5. If there is a document between the Exit Turn and Ex
Remove the document.
● Replacement part
Service Manual
CLX-9250/9350 series
7. Troubles shooting
● Error message :
:
Original paper jam in n exit area of scanner
Original paper jam in n exit area of scanner
Original paper jam in n exit area of scanner
xit turn sensor in normal time.
he Feed Out Assy. Pull and remove the jammed he Feed Out Assy Pull and remove the jammed
the Cover-Exit tray and remove the jammed
xit roller, transfer the document by rotating the Knob.
7-1 42
SAMSUNG ELECTRONICS