Samsung CLX-9350ND Service Manual page 366

● Code :
A3-2111
A3-2112
● Symptom / Cause :
y p
Calibration for density sensor is failed
● Troubleshooting method :
Execute the density calibration.
1. Open the door and close it.
2. Turn off the machine then on.
3. Remove the ITB and re-install it.
● Replacement part
- JC96-05689A : CARTRIDGE-TRANSFER ITB
Service Manual
CLX-9250/9350 series
7. Troubles shooting
● Error message :
Actuator Sensor Fail lure #A3-2111: Please open/close door.
Actuator Sensor Fail lure #A3-2112: Please open/close door.
7-2 26
SAMSUNG ELECTRONICS