Thermistor - Samsung CLX-9350ND Service Manual

3.5.2 Thermistor

Perform the following procedure to remove the Therm
1. Take off the Bracket fuser top [A] after removing 4 s
CAUTION CAUTION
When removing 2 screws pointed by the a
2. Take off the thermistor assembly after removing 2 sc
CAUTION
Be careful not to bend the thermistor.
NOTE
Contact type NTC thermistors work in NON-CON
fuser belt surface. f b lt f
Service Manual
CLX-9250/9350 series
3. Replacemen nt Procedures
istor from the Fuser Unit.
screws.
arrow, be careful not to damage in harness
rews.
NTACT conditions. They must not touch
3-3 30
[A]
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
SAMSUNG ELECTRONICS