10. Put in the supporting rubber into the DADF cable c
the screw.
11. Open the DADF and place the white sheet. White s
aligned it with the registration guide at the top left c
12. Carefully close the DADF. The white sheet will be a
attached properly when the DADF is opened, stick
stickers.
ti k
Service Manual
CLX-9250/9350 series
3. Replacemen
nt Procedures
cover. Assemble the DADF cable cover. And tighten
side should be faced down on the scanner glass and
corner of the glass.
attached to the DADF. If the white sheet is not
the white sheet on the DADF properly using the
3-9
90
SAMSUNG ELECTRONICS