Samsung CLX-9350ND Service Manual page 164

3.5.5 Fuser Bias / Fuser Bias Termina
Perform the following procedure to remove the Fuser B
1. Remove the guide duplex after removing 6 screws. g
2. Remove the Fuser bias [A] and the Fuser bias term
When removing [B], slide it to the direction of arrow
NOTE
When you are only replacing the Fuser Bias Terminal
Service Manual
CLX-9250/9350 series
3. Replacemen
p g
[A]
nt Procedures
al
ias / Fuser Bias Terminal from the Fuser Unit.
inal [B] after removing 3 screws.
.
[B]
[B], you do not need to remove the Duplex guide.
3-3 36
SAMSUNG ELECTRONICS