● Code :
S1-2511
● Symptom / Cause :
Communication error between EEPROM and Video bo
● Troubleshooting method :
1. Is the MSOK installed properly?
No : Install the MSOK properly.
2. If the problem persists, replace the Video board.
● Replacement part
- JC92-02150A : PBA-MAIN (CLX-9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
Service Manual
CLX-9250/9350 series
7. Troubles
shooting
● Error message :
:
MSOK System Failu
ure #S1-2511 : Turn off then on.
oard has occurred.
7-1
02
SAMSUNG ELECTRONICS