3.4.9 Scan motor and gear belt
Perform the following procedure to remove the Scan mo
1. Remove the Spring [A].
1. Remove the Spring [A].
2. Remove 3 screws.
3. Release the gear belt from the gear. Remove the Sca
[C]
3.4.10 Home sensor
Perform the following procedure to remove the Home S
1. Remove the scan glass(3.4.1) and rear cover(3.4.3).
2. Release the home sensor [A] by pushing sensor hing
2 Release the home sensor [A] by pushing sensor hing
Service Manual
CLX-9250/9350 series
3. Replacemen
[A]
[A]
3-2
nt Procedures
otor and Gear belt from the Scan Unit.
an Motor [C].
Sensor from the Scan Unit.
ge from the rear.
ge from the rear
22
[B]
SAMSUNG ELECTRONICS