3.12.5 Pick-Up Guide Sensor PB
Perform the following procedure to remove the Pick-up
1. Remove 2 screws.
2. Push and release 4 hooks from the bottom.
2 Push and release 4 hooks from the bottom
3. Remove DADF Left Side Cover [J].
[J]
Hooks
4. Release the holder-damper after removing 2 screws.
Service Manual
CLX-9250/9350 series
3. Replacemen
nt Procedures
BA
Guide Sensor PBA from the DADF Unit.
3-9
98
SAMSUNG ELECTRONICS