Samsung CLX-9350ND Service Manual page 65

2.7.4.7 Interval During Print Job
Line position adjustment interrupts printing and then st
occurs when the machine checks at the sheet interval
when one of these conditions occurs:
∆T > Temperature threshold (LSU temperature: [d
•
• Pages > Output threshold for all outputs (default: 1
2.7.4.8 Waste Toner Container Not-In
Line position adjustment starts automatically when wa
triggered after removing the Imaging Unit or when cha
new Imaging Unit, line position adjustment is automati
2.7.4.9 Printer Magnification Change
Line position adjustment starts automatically when ma
2.7.4.10 Main Scan Skew Adjustmen
Skew adjustment assembly [A] consists of the step mo
adjusts the scanning line slope automatically. The F2
yellow adjust the angle of the F2 lens [B] respectively, ll dj t th l
mechanism corrects main scan skew.
Service Manual
CLX-9250/9350 series
2. Product d
f th F2 l [B]
[B]
description
tarts automatically when one of these conditions
. Line position adjustment is automatically done
default: 3°C])
1000 pages)
nstalled / Installed
ste toner container is not-installed/installed. This is
anging Imaging Unit. When the machine detects a
cally performed.
es
agnification is changed in the printer adjustment menu.
nt
otor, worm, and worm gear. At ACR, it detects and
lens positioning motors [A] for magenta, cyan, and
ti l based on the F2 lens position for black. This b d th F2 l
[A]
[C/M/Y]
2-4 48
iti f bl k Thi
[B]
SAMSUNG ELECTRONICS