Solenoid - Samsung CLX-9350ND Service Manual

3.13.3.4 Solenoid

Perform the following procedure to remove the 2 Side
1. Remove harness cover [A],[B] after removing 1 Remove harness cover [A] [B] after removing
5 screws
[A] [A]
2. Unplug connector [C] after removing 2 screws and
removing solenoid [E]. g
[C]
Service Manual
CLX-9250/9350 series
3. Replacemen
[B]
[ ]
[E]
nt Procedures
Unit Solenoids from the printer.
3. Unplug connector [C] and removing 3 screws. 3 Unplug connector [C] and removing 3 screws
4. Take off solenoid.
3-1 10
SAMSUNG ELECTRONICS