Samsung CLX-9350ND Service Manual page 392

● Code :
C5-1311
● Symptom / Cause :
1. Transfer belt Unit is not placed in the set.
2. Dime screw is not fixed correctly.
3. EEPROM contact of transfer belt unit is defective.
● Troubleshooting method :
1. Check if the transfer unit is installed in the set.
Take out the transfer unit and re-install it.
2. Fix the Dime screw correctly.
3. Check if the EEPROM contact is contaminated. Cle
4. Turn the machine off and replace the transfer unit. 4 Turn the machine off and replace the transfer unit
● Replacement part
- JC96-05689A : CARTRIDGE-TRANSFER ITB
- JC92-02162A : ITB JOINT
Service Manual
CLX-9250/9350 series
7. Troubles shooting
● Error message :
:
Transfer belt is not i nstalled. Install it.
ean it.
7-5 52
SAMSUNG ELECTRONICS