Handling Precautions - Samsung CLX-9350ND Service Manual

1.2.3 Handling Precautions

The following instructions are for your own personal sa
product.
(1) Ensure the printer is installed on a level surface ca (1) Ensure the printer is installed on a level surface, ca
cause the printer to tip or fall.
(2) The printer contains many rollers, gears and fans.
fingers, hair or clothing in any of these rotating dev
(3) Do not place any small metal objects, containers o
which if spilled could get into the machine and cau
(4) Do not install the machine in areas with high dust o
a humidifier or heater. Damage could be caused to
(5) Do not place candles, burning cigarettes, etc on th
(6) When reinstalling the imaging unit or ITB unit at po
1.2.4 Assembly / Disassembly Precau
Replace parts carefully and always use Samsung part
cable routing before dismantling any part of the machi
Please carry out the following procedures before dism
(1) Check the contents of the machine memory and m
if the main board or network card is replaced.
(2) Ensure that power is disconnected before servicing
(3) Disconnect printer interface cables and power cabl (3) Disconnect printer interface cables and power cabl
(4) Only use approved spare parts. Ensure that part nu
temperature rating are correct.
(5) When removing or re-fitting any parts do not use ex
plastic.
(6) Take care not to drop any small parts into the mac
(7) Handling of the OPC Drum
- The OPC Drum can be irreparably damaged if it e - The OPC Drum can be irreparably damaged if it e
Take care not to expose the OPC Drum either to d
room lighting. Exposure for as little as 5 minutes c
properties and will result in print quality degradatio
Remove the OPC Drum and store it in a black bag
working with the Covers (especially the top cover)
damage the OPC Drum.
- Take care not to scratch the green surface of OPC
If the green surface of the Drum Cartridge is scrat
compromised.
Service Manual
CLX-9250/9350 series
1. Preca autions
afety, to avoid injury and so as not to damage the
apable of supporting its weight. Failure to do so could apable of supporting its weight Failure to do so could
Take great care to ensure that you do not catch your
vices.
of water, chemicals or other liquids close to the printer
use damage, shock or fire hazard.
or moisture levels, beside on open window or close to
g o the printer in such areas.
e printer, These could cause a fire.
ower off, perform the OPC-ACR surely.
utions
ts. Take care to note the exact location of parts and
ne. Ensure all parts and cables are replaced correctly.
antling the printer or replacing any parts.
ake a note of any user settings. These will be erased
g or replacing any electrical parts.
les les.
umber, product name, voltage, current and
xcessive force, especially when fitting screws into
hine.
exposed to light exposed to light.
direct sunlight or to fluorescent or incandescent
can damage the surface of the photoconductive
on. Take extra care when servicing the printer.
g or other lightproof container. Take care when
) open as light is admitted to the OPC area and can
C Drum Unit.
tched or touched the print quality will be
1- 1- -3 -3
p
SAMSUNG ELECTRONICS