Error Code Details - Samsung CLX-9350ND Service Manual

7.2.2 Error Code Details

● Code :
A1-1113
A1-1213
● Symptom / Cause :
Fuser motor does not operate.
Fuser motor is operating but is recognized as stop stat
● Troubleshooting method :
1. Turn the machine off. Check if there is any foreign m
2. Remove the fuser unit and reinstall it.
3. Turn the machine on. Is the problem solved?
If not, go to the next.
4. Turn the machine off.
Open the engine/video shield door.
Check if the fuser/exit motor connector is connected
If the problem persists, replace the fuser/exit drive m
Fuser/Exit drive
motor
5. If the motor operates normally, replace the fuser uni
● Replacement part
- JC31-00123B (MOTOR BLDC)
- JC91-00931A (FUSER : 220V)
- JC91-00930A (FUSER : 110V)
Service Manual
CLX-9250/9350 series
7. Troubles shooting
● Error message :
Actuator Motor Failu re #A1-1113: Please open/close door.
Actuator Motor Failu re #A1-1213: Please open/close door.
tus.
matter around the fuser unit.
d properly.
motor. (Refer to 3.11.2 of the chapter 3)
it.
7-1 15
SAMSUNG ELECTRONICS