Mitsubishi Electric FR-A820-00046 (0.4K) Instruction Manual page 335

 Automatic parameter setting (Pr.999)
• Select which parameters to automatically set from the following table, and set them in Pr.999. Multiple parameter settings
are changed automatically. Refer to
Pr.999
setting
1 Sets the standard monitor indicator setting of PID control.
2 Automatically sets the monitor indicator for PID control.
Automatically sets the communication parameters for the GOT
connection with a PU connector
10
("Controller Type" in GOT: FREQROL 500/700/800, SENSORLESS
SERVO)
Automatically sets the communication parameters for the GOT
connection with RS-485 terminals
11
("Controller Type" in GOT: FREQROL 500/700/800, SENSORLESS
SERVO)
Automatically sets the communication parameters for the GOT
12 connection with a PU connector
"Controller Type" in GOT: FREQROL 800 (Automatic Negotiation)
Automatically sets the communication parameters for the GOT
13 connection with RS-485 terminals
"Controller Type" in GOT: FREQROL 800 (Automatic Negotiation)
50 Hz rated
20
frequency
60 Hz rated
21
frequency
NOTE
• If the automatic setting is performed with Pr.999 or the automatic parameter setting mode, the settings including the changed
parameter settings (changed from the initial setting) will be automatically changed. Before performing the automatic setting,
confirm that changing the parameters will not cause any problem.
 PID monitor indicator setting (Pr.999 = "1 or 2")
Pr.
759 PID unit selection
1142 Second PID unit selection
Operation panel monitor selection
774
1
Operation panel monitor selection
775
2
Operation panel monitor selection
776
3
C42 (934) PID display bias coefficient
C44 (935) PID display gain coefficient
Second PID display bias
1136
coefficient
Second PID display gain
1138
coefficient
— 3-line monitor setting
— Direct setting
— Dedicated parameter list function
*1 Enabled when the FR-LU08 (-01) is used.
*2 Enabled when the FR-PU07 is used.
*3 Enabled when the FR-PU07-01 is used.
334
5. PARAMETERS
5.7 (E) Environment setting parameters
page 335 for the list of parameters that are changed automatically.
Description
Sets the related parameters of the rated
frequency according to the power supply
frequency
Name Initial value
9999
9999
9999
9999
9999
9999
9999
9999
9999
—
—
—
Operation in the automatic parameter setting mode
"
"1".
"
"2".
"
"1".
—
"
"2".
—
"
"1".
—
Pr.999 = "1" Pr.999 = "2"
9999 4
9999 4
9999 52
9999 53
9999 54
9999 0
9999 100
9999 0
9999 100
*1*2*3
Invalid
Enabled
*3
Invalid
Enabled
*3
Invalid
Enabled
" (AUTO) → " " (PID) → Write
" (AUTO) → " " (PID) → Write
" (AUTO) → " " (GOT) → Write
" (AUTO) → " " (GOT) → Write
" (AUTO) → " " (F50) → Write
Refer to page
584
424
584
—
—
—