Basic Operation Procedure (Jog Operation); Giving A Start Command By Using External Signals For Jog Operation - Mitsubishi Electric FR-A820-00046 (0.4K) Instruction Manual

Fr-a800 series
Hide thumbs Also See for FR-A820-00046 (0.4K):
Table of Contents

Advertisement

4.7

Basic operation procedure (JOG operation)

4.7.1
Giving a start command by using external signals
for JOG operation
• JOG operation is performed while the JOG signal is ON.
• Use Pr.15 Jog frequency to set a frequency, and set Pr.16 Jog acceleration/deceleration time to set the acceleration/
deceleration time for JOG operation.
• Set Pr.79 Operation mode selection = "2" (External operation mode).
[Connection diagram]
Forward rotation start
Reverse rotation start
JOG signal
Switch
The following shows the procedure to operate at 5 Hz.
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Turning ON the JOG signal
Turn ON the JOG switch (JOG signal). The inverter is set ready for the JOG operation.
3.
Start → acceleration → constant speed
Turn ON the start switch (STF/STR signal). The frequency increases according to the setting of Pr.16 Jog
acceleration/deceleration time, and "
the forward rotation, and [REV] indicator is ON during the reverse rotation.
4.
Deceleration → stop
Turn OFF the start switch (STF/STR signal). The frequency decreases according to the setting of Pr.16 Jog
acceleration/deceleration time. "
[FWD] or [REV] indicator turns OFF. Turn OFF the JOG switch (JOG signal).
NOTE
• To change the running frequency, change the setting of Pr.15 Jog frequency (initial value: 5 Hz).
• To change the acceleration/deceleration time, change the setting of Pr.16 Jog acceleration/deceleration time (initial value:
0.5 seconds).
Parameters referred to
Pr.15 Jog frequency, Pr.16 Jog acceleration/deceleration
Pr.79 Operation mode
selectionpage 370
Inverter
STF
STR
JOG
SD
" (5.00 Hz) appears on the LCD display. [FWD] indicator is ON during
" (0.00 Hz) appears on the LCD display, and the motor stops rotating.
timepage 390
4. BASIC OPERATION
4.7 Basic operation procedure (JOG operation)
1
2
3
4
5
6
7
8
9
10
159

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fr-a820-00167 (2.2k)Fr-a820-00046-gf (0.4k)Fr-a820-00250 (3.7k)Fr-a820-00105-gf (1.5k)Fr-a820-00077 (0.75k)Fr-a820-00250-gf (3.7k) ... Show all

Table of Contents