Honda 2004 Odyssey Service Manual page 1488

5. Remove the bolts and remove the cushion latch (A)
with the cushion latch cable (B).
Fastener Locations
: Bolt, 2
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
B
6. Install the lever/cable in the reverse order of
removal, and note these items:
• Make sure the cushion latch cables are routed
properly and connected securely.
• Make sure the third seat latches and unlatches
properly.
• Replace any clips (A) you removed with new
ones using commercially available upholstery
ring pliers (B).
A
Third Row Seat-back Recline Cable
Replacement
NOTE:
• When prying with a flat-tip screwdriver, wrap it with
protective tape to prevent damage.
• Take care not to bend the cables.
• Take care not to kink or scratch the interior trim.
• Put on gloves to protect your hands.
1. Remove these items:
• Recline lever trim (see step 1 on page 20-120)
• Recline upper cover (see step 2 on page 20-120)
2. Remove the seat-back cover as necessary (see
page 20-124).
3. Disconnect and detach the seat-back recline cable
(A) from the seat-back recline lever (B) and the link
A
plates (C) on both sides. Then remove the seat-back
recline cable.
B
4. Install the cable in the reverse order of removal,
and make sure the recline cables are routed
properly and connected securely.
A
A
B
A
C
B
A
20-123 20-123