Gauges
Gauge Assembly Replacement
1. Remove the instrument panel (see page 20-69).
2. Remove the screws (A) from the gauge assembly
(B), and spread a protective cloth (C) on the upper
column cover.
3. Disconnect the connectors (D), and remove the
gauge assembly.
4. Install in the reverse order of removal.
22-100
22-100
D
B
C
Resetting the Maintenance Required
Indicator
How to Reset
Press the select switch and reset switch at the same
time, turn the ignition switch ON (II), and hold them
more than 10 seconds.
Blinking Pattern:
Miles (km)
At 5,900 (9,440)
to 6,100 (9,760)
At 7,400 (11,840)
to 7,600 (12,160)
A
Maintenance Reminder Light
Blinks for 10 seconds when
the ignition switch is turned
ON (II).
Comes on and stays on while
the ignition switch is ON (II).