Intermediate Shaft Installation - Honda 2004 Odyssey Service Manual

6. Install the outer seal (A) into the bearing support (B)
using the special tools and a press.
PRESS
07947-4630100
B
7. Install the heat shield onto the bearing support.

Intermediate Shaft Installation

A
Pack the interior
of the outer seal.
07LAF-SM40300
07965-SD90100
1. Use solvent or brake cleaner to thoroughly clean
the areas where the intermediate shaft (A) contacts
the transmission (differential) thoroughly with
solvent or brake cleaner, and dry with compressed
air. Insert the intermediate shaft assembly into the
differential. Hold the intermediate shaft horizontal
to prevent damage to the differential oil seal (B).
2. Install the three dowel bolts (C).
3. Install the right driveshaft (see page 16-16).
4. Refill the transmission fluid:
• 4-speed 1999-2001 automatic transmission (see
page 14-137).
• 5-speed 2002-2004 automatic transmission (see
page 14-368).
C
B
39 N·m
(4.0 kgf·m, 29 lbf·ft)
A
16-21 16-21