Tailgate Weatherstrip Replacement
1. Remove the tailgate weatherstrip (A) by pulling out
on it.
2. Apply clear sealant (B) into the channel of the
tailgate weatherstrip all the way around.
Sealant: Cemedine P/N 08712-0004, or equivalent
3. Locate the painted alignment mark (C) on the
tailgate weatherstrip. Align the painted mark with
the alignment tab in the the center of the tailgate
opening, and install the tailgate weatherstrip all the
way around in the direction shown. Make sure
there are no wrinkles in the weatherstrip.
4. Check for water leaks.
A
A
B
C
Inside
20-141