Wheel Alignment - Honda 2004 Odyssey Service Manual

Wheel Alignment

Front Caster Inspection
For proper inspection/adjustment of the wheel
alignment, check and adjust the following before
checking the alignment:
• Check that the suspension is not modified.
• Check the tire size and tire pressure.
• Check the runout of the wheels and tires.
• Check the suspension ball joints. (Hold a wheel with
your hands, and move it up and down and right and
left to check for wobbling.)
Use commercially-available computerized four wheel
alignment equipment to measure wheel alignment
(caster, camber, toe, and turning angle). Follow the
equipment manufacturer's instructions.
1. Check the caster angle.
Caster angle: 2° 07' 1°
2. If out of specification, check for bent or damaged
suspension components.
Front Camber Inspection
Use commercially-available computerized four wheel
alignment equipment to measure wheel alignment
(caster, camber, toe, and turning angle). Follow the
equipment manufacturer's instructions.
1. Check the camber angle.
Camber angle:
Front: 0° 00' 1°
Rear: 0° 30' 45'
2. If out of specification, record the camber reading,
then adjust the camber.
(cont'd)
18-5