Safety Indicator Input Test - Honda 2004 Odyssey Service Manual

Hide thumbs Also See for 2004 Odyssey:

Table of Contents

Safety Indicator System

Safety Indicator Input Test

1. Remove the gauge assembly (see page 22-100).

2. Disconnect the 14P connector A and 22P connector B from the gauge assembly.

3. Inspect the connector and socket terminals to be sure they are all making good contact.

• If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.

• If the terminals look OK, go to step 4.

14P CONNECTOR A

22P CONNECTOR B

Wire side of female

Wire side of female

Table of Contents