Honda 2004 Odyssey Service Manual page 1272

15. Connect the ABS fail-safe relay connector terminals
No. 3 and No. 4 with a jumper wire.
ABS FAIL-SAFE RELAY CONNECTOR
FSR (YEL/GRN)
JUMPER WIRE
Wire side of female terminals
16. Check for continuity between the ABS control unit
connector terminal No. 21 and body ground.
ABS CONTROL UNIT CONNECTOR A (22P)
FSR (YEL/GRN)
Wire side of female terminals
Is there continuity?
YES If the problem recurs, replace the ABS
control unit.
NO Repair open in the wire between the ABS
control unit and the ABS fail-safe relay.
GND (BLK)
DTC 61, 62: Battery Voltage
1. Clear the DTC (see step 1 on page 19-43).
2. Test-drive the vehicle at 6 mph (10 km/h) or more.
Does the ABS indicator come on?
YES Go to step 3.
NO The system is OK at this time.
3. Verify the DTC.
Is DT C 61 or 62 indicated?
YES Check the charging system.
NO Do the appropriate troubleshooting for the
code.
19-71 19-71