Cisco TelePresence Administrator's Manual page 178

Field Description
State Indicates if the rule is enabled or not.
Cisco VCS Administrator Guide (X7.1)
Dial plan and call processing
Usage tips
When you are making or testing
configuration changes to your Cisco AM GW
policy rules, you may want to temporarily
enable or disable certain rules. You may
also want to configure certain rules but only
apply them occasionally. You can do this by
selecting the rule's check box and clicking
Enable or Disable as appropriate. Any
disabled rules still appear in the rules list
but are ignored by the VCS when
determining which calls are routed via the
Cisco AM GW.
Page 178 of 479