Zone Configuration: Advanced Settings - Cisco TelePresence Administrator's Manual

Field Description
H.323 Determines whether H.323 calls are allowed to systems
mode and endpoints located using DNS lookups via this zone.
SIP Determines whether SIP calls are allowed to systems
mode and endpoints located using DNS lookups via this zone.
TLS Controls whether the VCS performs X.509 certificate
verify checking against the destination system server returned
mode by the DNS lookup.
Zone Determines how the zone's advanced settings are
profile configured.
Default: uses the factory defaults.
Custom: allows you to configure each setting
individually.
Preconfigured profiles: choose one of the preconfigured
profiles to automatically use the appropriate settings
required for connections to that type of system.
The default is Default.

Zone configuration: advanced settings

The table below describes the Advanced and Custom zone configuration options. Some of these settings
only apply to specific zone types.
Note: you should only use the Custom zone profile settings on the advice of Cisco customer support.
Cisco VCS Administrator Guide (X7.1)
Zones and neighbors
Usage tips
This setting only applies if the DNS lookup
specifies TLS as the required protocol. If TLS
is not required then the setting is ignored. See
TLS certificate verification of neighbor systems
for more information.
See Zone configuration: advanced settings
for details on the Advanced settings.
Do not use the Custom option or configure
the individual Advanced settings except on
the advice of Cisco customer support.
Page 128 of 479