Cisco TelePresence Administrator's Manual page 464

Name: "ClusterSubZone"
Bandwidth:
LocalUsage: <0..100000000>
ClusterUsage: <0..100000000>
Calls: {visible only if there are calls}
Call [0..900]: {0..900 entries}
CallId: <S: 1,255>
SubZone: [0..100]
Name: <S: 1,50 Node name>
Bandwidth:
LocalUsage: <0..100000000>
ClusterUsage: <0..100000000>
Registrations: {0..3750 entries} {visible only if there are registrations}
Registration: <1..3750>
SerialNumber: <S: 1,255>
Calls: {visible only if there are calls}
Call [0..900]: {0..900 entries}
CallId: <S: 1,255>
Searches:
Current:
Total:
Dropped:
Zone [1..1000]:
Name: <S: 1,50 Node name>
Bandwidth:
LocalUsage: <0..100000000>
ClusterUsage: <0..100000000>
Status: <Active/Failed/Warning>
Cause: {Visible if status is Failed or Warning} <System unreachable/ Systems
unreachable>
Type: <Neighbor/TraversalClient/TraversalServer/ENUM/DNS>
Neighbor: {Visible if Type is Neighbor}
Peer [1..6]:
H323: {visible if H323 Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {visible if Status is Failed} <No response from gatekeeper/DNS
resolution failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS
lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
SIP: {visible if SIP Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {visible if Status is Failed} <No response from gatekeeper/DNS
resolution failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS
lookup}
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
TraversalClient: {Visible if Type is TraversalClient}
Peer [1..6]:
H323: {visible if H323 Mode=On for Zone}
Status: <Unknown/Active/Failed>
Cause: {visible if Status is Failed} <No response from gatekeeper/DNS
resolution failed/Invalid alias/Authentication Failed/Invalid IP address>
Address: <IPv4Addr/IPv6Addr> {One Address line per address from DNS
lookup}
Cisco VCS Administrator Guide (X7.1)
Reference material
Page 464 of 479