Cisco TelePresence Administrator's Manual page 370

ID Title
15007 The system is
busy
15008 Failed to load
database
15009 Factory reset
started
15010 Application
failed
15011 Application
failed
15012 Language pack
mismatch
15013 Factory reset
failed
15014 Restart required Core dump mode has been
15015 Maintenance
mode
15016 Directory
service
database failure
15017 Application
failed
20003 Invalid cluster
configuration
20004 Cluster
communication
failure
20005 Invalid peer
address
20006 Cluster
database
communication
failure
20007 Restart required Cluster configuration has been
20008 Cluster
replication error
Cisco VCS Administrator Guide (X7.1)
Description
The system is shutting down, or
starting
The database failed to load; some
configuration data has been lost
Factory reset started
An unexpected software error was
detected in <module>
An unexpected software error was
detected in <module>
Some text labels may not be
translated
Factory reset failed
changed, however a restart is
required for this to take effect
The VCS is in Maintenance mode
and will no longer accept calls and
registrations
The directory service database is
not running
The OpenDS service has stopped
unexpectedly and has been
restarted
The cluster configuration is invalid
The system is unable to
communicate with one or more of
the cluster peers
One or more peer addresses are
invalid
The database is unable to replicate
with one or more of the cluster
peers
changed, however a restart is
required for this to take effect
Automatic replication of
configuration has been temporarily
disabled because an upgrade is in
progress
Solution
Restore system data from backup
View the incident reporting
View the incident reporting
Contact your Cisco representative to see if an
up-to-date language pack is available
Restart the system
Restart the system
If the problem persists, contact your Cisco
representative
Check the Clustering page and ensure that this
system's IP address is included and there are
no duplicate IP addresses
Check the clustering configuration
Check the Clustering page and ensure that all
Peer fields use a valid IP address
Check the clustering configuration and restart
Restart the system
Please wait until the upgrade has completed
Reference material
Severity
Alert
Warning
Alert
page Error
page Error
Warning
Alert
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Page 370 of 479